Match the items on the right to the items on the left.

Use the recommended tire	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
By turning the wheel and pushing in the valve pin	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
A good quantity of self-drying	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
The tracks should hang down	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
After working the turbo unit must be given	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
You should always clean up any site where you	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
Avoid at all costs water entering the	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
A vacuum pump is often	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
You can get a good idea of the condition	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.
For instance jerry cans often contain paint	??? it is easy to check how much of the tire has been filled with liquid. approximately 50 mm between the wheel centres. a chance to cool down before the engine is stopped. system while adding hydraulic oil. fill up with fuel, to minimize risks of contaminants getting into the tank. flakes that can cause fuel system problems. air pressure when using tracks. used when replacing hoses. of the hydraulic oil and system by regularly taking oil samples and having them tested. mounting paste should be used when mounting a tire.