Review QuestionsThis test consists of 10 questions for reviewing Chapter 7.Select all that apply (there may more than one correct answers per question).You have 10 minutes to complete the test.

Review Questions
This test consists of 10 questions for reviewing Chapter 7.
Select all that apply (there may more than one correct answers per question).
You have 10 minutes to complete the test.

It is important for a machine operator to know how to handle a fire.
1. Not if you are close to a water course.
2. Not if you are in the vicinity of a fire brigade.
3. It is always important otherwise the compensation from the insurance can be less.
Every machine must have a fire inspection every 2 years.
1. True
2. False
When you leave the machine, the main power switch should always be turned off.
1. True
2. False
Always replace a manual fire extinguisher immediately
1. when it has been emptied.
2. if it is lost or stolen.
3. when the pressure gauge is on red.
The fire extinguisher system in a forestry machine is enabled automatically when the main power is switched on, and the operator does not need to do anything else to activate it.
1. True
2. False
What is the normal plan of action if you suspect a fire?
1. Turn the engine off.
2. Climb out of the cab.
3. Check if there is any water in the nearby stream.
4. If you locate a small fire, activate the fire extinguisher system.
5. Call the local fire brigade for help.
What do you have to do if you are on the ground and suspect a fire in the machine?
1. Turn the main power switch off which triggers the fire extinguisher system.
2. Be prepared to use the manual fire extinguisher.
3. If the machine still burns, call the insurance company.
The machine operator should be present during the regular fire safety inspections.
1. True
2. False
If a radiator breaks, fluid such as hot oil, sprayed on the turbo can trigger a very rapid fire.
1. True
2. False
It is not necessary to keep a machine clean from needles and scraps as such material is not flammable.
1. True
2. False